Using basic controls

Connecting a computer

1

HDMI

AUDIO

VGA

INPUT

PC INPUT

PC INPUT

5 3 2

4

6

To connect a computer:1Remove the port cover (1) on the back of your TV combo.

2Plug a VCA cable (2) into the VGA port on the computer (4) and into the VGA INPUT port on the back of your TV combo.

3Plug a audio cable (3) into the audio jack on the computer (4) and into the AUDIO VGA INPUT port on the back of your TV combo.

4Turn on your TV combo.5Press INPUT and the orto select PC/VGA.

Note

The best resolution for displaying computer video on your TV combo is 1280 × 768.To connect an HDMI device to the HDMI jack:

1Remove the port cover on the back of your TV combo (1).

2Plug an HDMI cable (5) into the HDMI port on the HDMI deivce (6) and into the HDMI INPUT port on the back of your TV combo.

3Turn on your TV combo.

4 Press INPUT and the orto select HDMI.

11

Using basic controls

Turning your TV combo on and off

To turn your TV combo on and off:

1Press POWER on the side of your TV combo or on the remote control. The POWER/STANDBY indicator turns green.

2To turn off your TV combo, press POWER again. The POWER/STANDBY indicator turns red.

Note

A small amount of electric power is consumed even when the power is turned off.

Adjusting the volume

You can adjust the volume using the controls on your TV combo’s side panel or the remote control.

To adjust the volume:1Press VOL+ or VOL- to increase or decrease the volume.

2Press MUTE to mute the sound, then press this button again to restore the sound.

Changing the video mode

Your TV combo supports multiple video modes.To select the video mode:

•Press INPUT one or more times to select the video mode, then press ENTER. You can select:

•TV•AV1•AV2•S-Video•Component•DVD•HDMI•VGA

Using the TV

Selecting the TV signal source

To select the TV signal source:

1Press TV MENU, then press or to highlight the CHANNEL icon. The CHANNEL menu appears.

2Press to enter the menu.3Pressorto select Antenna, then pressorto select Air or CATV.4Air–VHF/UHF channels.5 CATV–Cable TV channels.6 Press TV MENU one or more times to close the menu.

Changing channels

To change channels:•Press the CH+ or CH– on the side of your TV combo or the CH or CH .To enter a channel number directly:•Press the number buttons on the remote control.

In digital TV mode, a main (major) channel may have one or more sub (minor) channels. Press the number buttons for the major channel, press the • button (to the left of the 0 button), then press the number button for the minor channel. For example, if you want to watch channel 5-2, press 5, press the • button, then press 2.

To go to the previous channel:
• Press RECALL.