Dynex DX-LTDVD20 Turning the screen saver on and off, Using DVD last memory, Setting up DVD speaker output, Setting up DVD Dolby Digital, PLAY, PLAY, PLAY, PLAY, PLAY, Exit

20

Turning the screen saver on and off

To turn the screen saver on and off:

1While your TV combo is in DVD mode, press SETUP. The General Setup icon is highlighted.

2Press PLAY. The General Setup Page opens.

3Press or to highlight Screen Saver, then press PLAY.4 Press or to highlight On or Off, then press PLAY.5 Press one or more times to go back to the previous menu.

6To close the menu, press to highlight the Exit icon, then press

PLAY.

Using DVD last memory

Your TV combo can remember where a DVD stopped playing when your TV combo is turned off. When your DVD combo is turned on and you start DVD playback, playback resumes at the point where it stopped.

To use last memory:

1While your TV combo is in DVD mode, press SETUP. The General Setup icon is highlighted.

2Press PLAY. The General Setup Page opens.

3Press or to highlight Last Memory, then press PLAY.

4 Press or to highlight On or Off, then press PLAY.

5 Press one or more times to go back to the previous menu.

6To close the menu, press to highlight the Exit icon, then press

PLAY.

Setting up DVD speaker output

To set up speaker output:1While your TV combo is in DVD mode, press SETUP.

2Press or to select the Audio icon, then press PLAY. The Audio Setup Page opens.

-- Audio Setup Page --Speaker Setup

Dolby Digital Setup

Channel Equalizer3D ProcessingGo To Speaker Setup Page

3Press or to highlight Speaker Setup, then press PLAY. The Speaker Setup Page opens.

-- Speaker Setup Page --Downmix STR Lt/RtStereoAudio Setup4Press or to highlight Downmix, then press PLAY.5Press or to highlight Lt/Rt or Stereo, then press PLAY.

•Lt/Rt–On a disc recorded with a multichannel soundtrack, the output signal will be incorporated into the left and right channel.

•STEREO–On a disc recorded with a multichannel soundtrack, the output signal will be incorporated into stereo.

Using the DVD player

6Press one or more times to go back to the previous menu.7To close the menu, press to highlight the Exit icon, then press PLAY.

Setting up DVD Dolby Digital

To set up Dolby Digital:

1While your TV combo is in DVD mode, press SETUP.

2Press or to select the Audio icon, then press PLAY. The Audio Setup Page opens.

-- Audio Setup Page --

Speaker Setup

Dolby Digital Setup

Channel Equalizer

3D Processing

Go To Speaker Setup Page

3Highlight Dolby Digital Setup, then press PLAY. The Dolby Digital Setup Page opens.

-- Dolby Digital Setup --

Dual Mono	STR	Stereo
		Left Mono
		Right Mono
		Mixed Mono
D.R.C
Audio Setup

4Press or to highlight DUAL MONO or D.R.C, then press PLAY.

•DUAL MONO–This is the output mode for the left and right signals of the selected audio output. If it is set to MIXED MONO, the function only works when the DVD uses 5.1-channel sound.

•D.R.C–Select to adjust the linear compression rate to obtaindifferent compression results for the signals.5Press or to change the setting, then press PLAY.6 Press one or more times to go back to the previous menu.

7To close the menu, press to highlight the Exit icon, then press PLAY.