22

Changing DVD preferences

You can change preferences only when the player is in STOP mode and the PW mode is set to OFF in the Password Setup page.

To change preferences:

1In DVD mode, press SETUP on the remote control, then select the Preferences icon, then press PLAY. The Preference Page opens.

•Audio–Changes the DVD audio language. If the language you select is available on the DVD, the audio is played in that language. If the language you select if not available on the DVD, the original audio is played.

•Subtitle–Changes the DVD subtitle language. If the language you select is available on the DVD, subtitles are displayed in that language. If the language you select is not available on the DVD, the original subtitle language is displayed.

•Disc menu–Changes the language for the disc menu. If the language you select is available on the DVD, the disc menu is displayed in that language. If the language you select is not available on the DVD, the disc menu is displayed in the original language.

•Default–Resets the DVD player settings to the defaultsettings.

2Press one or more times to go back to the previous menu.

3To close the menu, press to highlight the Exit icon, then press

PLAY.

Maintaining

Maintaining

Cleaning the cabinet

Wipe the front panel and other exterior surfaces of your TV combo with a soft cloth lightly dampened with lukewarm water.

Never use a solvent or alcohol to clean your TV combo. Do not spray insecticide near your TV combo. Such chemicals may cause damage and discoloration to the exposed surfaces.

Handling discs

A dirty, scratched, or warped disc may cause skipping or noise.To care for discs:•Hold discs by their edges.•Store discs in their cases when you are not using them.

•Do not expose discs to direct sunlight, high humidity, high temperature, or dust. Prolonged exposure to extreme temperatures can warp discs.

•Do not stick labels or tape on discs.To clean a disc:• With a soft cloth, wipe the disc from the center to the outer edge.

Caution

Do not use detergent or abrasive cleaning agents.They will damage the disc surface.