Using your TV

number, channel label (if preset), V-chip rating, signal type, sleep timer, picture size, audio information (stereo or SAP), and resolution.

Press DISPLAY again to clear the display, or wait a few seconds and the TV returns to normal operation automatically.

8Press RECALL to go back to the last channel you were watching, and press RECALL again to return to the original channel.

9Press SLEEP on the remote control to set the TV to turn off after a specified interval. The interval increases with each press of the SLEEP button (Off, 0h 5m, 0h 10m, 0h 15m, 0h 30m,..., 4h 0m). After the sleep timer is programmed, the display appears briefly to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time is displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to Off..

Setting up for the first time

The first time you turn on your TV, you need to select a language for the on-screen menus and scan for available channels.

Setting the on-screen language

To set the on-screen language:

1Make sure that your TV is plugged in and connected to an antenna, cable TV, or satellite TV.

2Press POWER. You may have to wait a few seconds for your TV to initialize.

3Press TV to select TV mode.

4Press SETUP/TV MENU. The initial on-screen menu opens.

5Press or to select Setup, then press or ENTER. The Setup menu opens.

Setup

Closed Caption

>>

 

 

LanguageEnglish

Video Label

>>

Backlight

16

Auto Shut Off

Off

Reset

>>

 

 

: Select

: Adjust

 

 

Note: When you press SETUP/TV MENU the first time after purchasing this TV, the above screen opens automatically.

6Press or to select Language.

7Press or to select English, French (Français), or Spanish (Español).

8Press EXIT/CANCEL to return to normal viewing.

Memorizing channels

This TV is equipped with a channel memory feature which lets you skip up or down to the next channel set into memory. Before selecting channels in this manner, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Signal Type option to the Air mode. When shipped from the factory, this menu option is in the Cable mode.

To select the signal type:

1Make sure that your TV is plugged in and connected to an antenna, cable TV, or satellite TV.

2Press POWER. You may have to wait a few seconds for your TV to initialize.

3Press TV to select TV mode.

11

4Press SETUP/TV MENU. The initial on-screen menu opens.

Main Menu

Picture

Audio

Channel>>

Lock

Setup

: SelectENTER : Set

5Press or to select Channel, then press or ENTER.

6Press or to select Auto Ch Memory, then press or ENTER. The Auto Ch Memory menu opens.

Auto Ch Memory

Signal Type

Cable

Automatic Search

Start

: Select : Adjust

7Press or to highlight Signal Type, then press or to select Air or Cable.

8Press EXIT to return to normal viewing.

To automatically scan for and memorize channels:

1Make sure that your TV is plugged in and connected to an antenna, cable TV, or satellite TV.

2Press POWER. You may have to wait a few seconds for your TV to initialize.

3Press TV to select TV mode.

4Press SETUP/TV MENU. The initial on-screen menu opens.

Main Menu

Picture

Audio

Channel>>

Lock

Setup

: SelectENTER : Set

5Press or to select Channel, then press or ENTER.