20

•Full picture size (for 16:9 source programs)—Displays the picture at the maximum size.

5After choosing the picture size you want, press EXIT to return to normal viewing.

Notes:

Selectable picture sizes may vary, depending on the input source or broadcast signal.

The Picture Size menu can also be opened by pressing ZOOM on the remote control.

Some high definition and/or digital broadcasts may not let you change the picture size.

In HDMI or COMPONENT mode, with a scanning rate of 720p or 1080i, only the Cinema Wide2 and Full sizes are available.

In PC Mode, only the Natural and Full picture sizes are available. Additionally, this feature does not work when display mode is WXGA.

To set the film mode:

1Press SETUP/TV MENU. The initial on-screen menu opens.

Main Menu

Picture>>

Audio

Channel

Lock

Setup

: SelectENTER : Set

2Press or to select Picture, then press or ENTER. The Picture menu opens.

Picture

 

Picture Setting

>>

 

 

Picture Preference

Dynamic

 

Picture Size

>>

 

 

Film Mode

On

 

 

PC Setting

>>

 

 

DNR

On

 

 

 

 

: Select : Adjust

3Press or to select Film Mode, then press or to select On or Off.

Note: For smoother motion, set the Film Mode to On when you view a DVD.

4After choosing the setting you want, press EXIT to return to normal viewing.

Changing the TV settings

To set the picture in PC mode:

1Press SETUP/TV MENU. The initial on-screen menu opens.

Main Menu

Picture>>

Audio

Channel

Lock

Setup

: SelectENTER : Set

2Press orto select Picture, then press or ENTER. The Picture menu opens.

Picture

 

Picture Setting

>>

 

 

Picture Preference

Memory

 

Picture Size

>>

 

 

Film Mode

Off

 

PC Setting

>>

 

 

DNR

Off

 

 

 

 

: SelectENTER : Set

3Press orto select PC Setting, then press or ENTER. The PC Setting menu opens.

PC Setting

 

 

 

 

 

 

Hor Position

25

 

 

 

 

 

 

 

 

 

Ver Position

25

 

 

 

 

 

 

Clock

0

 

 

 

Phase

25

 

 

 

 

 

 

 

 

 

 

: Select : Adjust ENTER:Set

4Press or to select the setting you want to adjust. Available options include:

•Hor Position—Lets you adjust the horizontal position of the image.

•Ver Position—Lets you adjust the vertical position of the image.

•Clock—Lets you adjust the clock, to eliminate vertical bars or stripes on the picture background.

•Phase—Lets you adjust the phase, after the frequency has

been set, to optimize the picture.

5After you adjust one setting, press ENTER to return to the PC Setting menu to adjust the other settings.

6After you have set the PC settings, press EXIT to return to normal viewing.

Notes:

If no buttons are pressed for more than about 40 seconds, the menu screen returns to normal automatically.

The computer settings do not affect other input modes.

Setting the DNR

DNR (Digital Noise Reduction) can reduce the roughness of the picture (only for analog broadcasts).