10

 

Setting up your television

 

 

 

 

 

Brand

Program code

One-For-All 0463

Sony8042

For compatibility with other universal remotes, use the codes listed for Emerson, Memorex, Orion, Sansui, Sylvania, or Zenith.

Setting up your television

Connecting your television to AC power

Use the AC polarized cord provided for operation on AC. Insert the AC plug into a standard 120V 60Hz polarized AC outlet.

AC outlet

Wider hole and blade

Polarized AC plug (one blade is wider than the other.)

Notes:

-Never connect the AC plug to other than the specified voltage (120V 60 Hz). Use the attached power cord only.

-If the polarized AC cord does not fit into a non-polarized AC outlet, do not file or cut the blade. It is your responsibility to have an electrician replace the obsolete outlet.

-If you cause a static discharge when touching the television and the television fails to work, unplug the television from the AC outlet, then plug it back in. The television should work normally.

Installing batteries in the remote control

Before using the remote control, you must install batteries. Use two AAA size batteries (not supplied). The batteries may last about one year depending on how much the remote control is used. For best performance, we recommend the batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or different types.