Setting up your television | 15 |
Connecting a video source to the AV2 (side panel) input
R
TV side 
panel 
W
Y
Video equipment
To Audio/
Video IN
R | W | Y |
Signal |
|
|
Audio/ Video cord (not supplied) | To Audio/ | |
Video OUT | ||
To view the AV2 video input, press INPUT on the remote repeatedly until AV2 appears on the screen.
Connecting a video source to the COMPONENT input
If your DVD player has component video out jacks, connect your television to a DVD player using a component video cord. It can greatly enhance picture quality and performance.
Note: This television can only receive Y Cb Cr (not Y Pb Pr) signals through the Component input.
TV back panel
(1)
G
|
| w |
| B |
|
|
| R |
To Component video IN | R | To Audio IN |
|
Component video cable | Audio cord (not supplied) | |
(not supplied) | ||
|
To Audio OUT W |
| R | R | B | G |
L | R | Cr | Cb |
| Y |
AUDIO OUTPUT | COMPONENT OUTPUT | ||||
To Component video OUT
DVD player