DX-TVMLPTB03
5

Installation instructions

STEP 1- Determine whether your TV has a flat back or an

irregular or obstructed back

1
Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from
damages and scratches.
2
If your TV has a table-top stand attached, remove the stand. See the documentation that came with your
TV for instructions.
3
Temporarily lay the TV brackets (B and C) on the back of your TV.
4
Align the screw holes in the TV brackets with the mounting screw holes on your TV.
5
Identify which type of back your TV may have:
Flat back: The brackets lay flush against the back of your TV and do not block any jacks. You do not need
spacers when assembling the wall mount.
Obstructed back: The brackets block one or more of the jacks on the back of your TV. You will need
spacers when assembling the wall mount.
Irregularly-shaped back: There is a gap between a bracket and some part of the back of your TV. You
will need spacers when assembling the wall mount.
6
Remove the TV brackets.
DX-TVMLPTB03_14-0885_MAN_V1_ENG.fm Page 5 Thursday, August 21, 2014 8:10 AM