DX-TVMLPTB03
9

STEP 3 - Option 2: Attaching the mounting hardware to TVs

with irregular or obstructed backs

Note: If you plan to use a 5° tilt with a larger TV (42”+), we suggest using spacers with the mounting
brackets so that the bottom of the TV does not touch the wall.
1
Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that
the brackets are level.
2
Place spacers (I) behind the TV brackets. If you are using M4 washers (G), place them between the
spacers and TV brackets and over the holes in the TV brackets. If you are using M6/M8 washers (H), place
them over the holes in the TV brackets. Insert screws (F, L, or N) through the washers, TV brackets, and
spacers.
3
Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You’ll need
G (8)
F (4)
Phillips screwdriver I (4) B and C TV
brackets
H (4)
or
or
Level
L (4) N (4)
or
DX-TVMLPTB03_14-0885_MAN_V1_ENG.fm Page 9 Thursday, August 21, 2014 8:10 AM