
8
Special instructions for VESA 100 x 100 and
VESA 100 x 200 configurations
These special instructions apply it you need to install the brackets on a small TV with the VESA 100 x 100 or
VESA 100 x 200 configurations.
Due to the way the TV mounting brackets (B and C) are made, the upper screw hole that must be used for
this installation is located behind the tilt mechanism. In addition, you must use the second hole from the
top (below the first slot) for the lower mounting screw.
1
Install the screws in the lower holes on the back of your TV. Use the second round screw hole below the
slot on each bracket.
2
Pull out the tilt mechanism from one of the brackets and install the screw in the upper hole in the back of
your TV.
3
Pull out the tilt mechanism from the other bracket and install the screw in the upper hole in the back of
your TV.
4
Tighten all four screws until snug. Do not over-tighten.
Use these holes for
the lower screws
DX-TVMLPTB03_14-0885_MAN_V1_ENG.fm Page 8 Thursday, August 21, 2014 8:10 AM