Dynex DX-TVMLPTB03 STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back

DX-TVMLPTB03
7
STEP 3 - Option 1: Attaching the mounting hardware to TVs
with a flat back
Note: If you plan to use a 5° tilt with a larger TV (42”+), we suggest using spacers with the mounting
brackets so that the bottom of the TV does not touch the wall.
1 Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that
the brackets are level.
2 Install washers (G or H), and screws (E, J, K, or M) into the holes in the back of the TV.
3 Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You’l l n e ed
G (4)
E (4)
Phillips screwdriver B and C TV brackets
or or
J (4) H (4)
or
K (4) Level
or
M (4)
DX-TVMLPTB03_14-0885_MAN_V1_ENG.fm Page 7 Thursday, August 21, 2014 8:10 AM