14 |
Step 8:
Fasten the bottom (E) to the left end (A). Use a flatblade screwdriver to tighten the two hidden cams. See “Tightening hidden cams” on page 7.
Fasten the bottom (E) to the lower upright (C). Use a Phillips screwdriver and two black 1 7/8" flat head screws (DD).
Slide the base (N) onto the notched edge of the bottom (E) so that the edge of the base is flush with the leg on left end (A).
Unfinished surface
Notched edge
Arrow
210°
You’ll need:
DD (2)
Flatblade screwdriver | Phillips screwdriver |
Need help? Call