Eagle Electronics 500C manual Frequency Change Transducer Frequency SeaFinder CDF only

To turn on FishTrack:

(Note: These instructions will turn on FishTrack and Fish I.D. at the same time.)

1.From the Sonar Page, press MENU↓ to SONAR FEATURESENT.

2.Press ↓ to DEPTHSENTEXITEXIT.

To turn off FishTrack, repeat the instructions in step 1. Turning off FishTrack in this manner will not turn off Fish I.D. symbols.

Symbols with

FishTrack depths

Sonar Features menu with Fish I.D. Depths selected (at left, dual-

frequency menu; center, single-frequency menu). When the check box to the left is checked, the feature is on. At right, Sonar Page showing Fish I.D. symbols and FishTrack depths turned on.

Frequency (Change Transducer Frequency) (SeaFinder CDF only)

The SeaFinder CDF transducer operates with both 200 kHz and 50 kHz. The 200 kHz frequency has a 12° cone angle and the 50 kHz fre- quency has a 35° cone angle.

68