Main Menu with Sonar Setup command selected (left). Submenu with Sonar Simulator command selected (center). Sonar Simulator menu (right), with simulator turned off (box is unchecked).
NOTE:
With Simulate Position checked, the simulator will automatically run the GPS simulator, if GPS data was recorded with the sonar log.
2.To use the default sonar chart log stored in the unit, press ENTEXIT. The recorded chart begins scrolling across the screen, just as if you were on the water. To turn off the simulator, repeat Step 1.
Title bar with chart file name
Play symbol flashing
Sonar Page playing a recorded sonar chart in Sonar Simulator mode.
Tip:
The Sonar Simulator can use sonar charts recorded on an MMC card. To play back a sonar chart, install the MMC containing the chart.
1.Press MENUMENU↓ to SONAR SETUPENT↓ to SONAR SIMULATORENT.
2.Press ↓ to CHART USEDENT.
79
