The Satellite Status Page has its own menu, which is used for setting various options. To access the Satellite Status Page Menu, from the Status Page, press MENU.
Navigation Page
This screen has a compass rose that not only shows your direction of travel, but also the direction to a recalled waypoint. To get to the Navi- gation Page press PAGES← → to NAVIGATIONEXIT.
The navigation screen looks like the one below when you are not navi- gating to a waypoint or following a route or trail. Your position is shown by an arrow in the center of the screen. Your trail history is il- lustrated by the line extending from the arrow. The arrow pointing down at the top of the compass rose indicates the current direction of travel (track).
Track or compass heading indicator, showing direction of travel
Trail line
Navigation 
information
displays in customizable
data boxes
Compass
rose
Present position arrow
Traveling north and recording a trail on the Navigation page. The page looks like this when the unit is not navigating to a waypoint, fol- lowing a route or backtracking a trail.
When navigating to a waypoint, the Navigation screen looks like the following figure. Your ground speed, track, distance, bearing to way- point and course are shown digitally on the screen.
NOTE:
Remember: when Speed, Track and Position information displays are flashing, satellite lock has not been achieved and no position fix has been determined. A question mark will flash on the present po- sition arrow in the center of the compass rose.
92
