ProThatch Attachment 11
Operator's Manual
IMPORTANT
Do not rotate wheels against tines. Wheels and tines will be dam- aged during operation.
If wheel rotation is not sufficient to provide proper wheel height clear- ance then perform these additional steps:
4.Loosen two upper wheel bracket bolts (C) with 10 mm wrench.
5.Slide fender/wheel assembly up drive shaft housing until proper wheel clearance is achieved. Tighten hex head bolts (C).
C
front j-handle adjustment
Tools Required: 10 mm Open End Wrench
Parts Required: None
1.Loosen two (2)
2.Rest dethatcher tines on flat surface. Stand to left side of drive shaft housing with right hand on throttle grip and left hand on
A
3.Move
A