16
Storage
1.Clean dethatcher attachment with a bristle brush and rinse with clear water.
IMPORTANT
Do not immerse this attachment in water. Water will enter gear housing and damage gears, bearings and seals.
2.Apply thin coating of oil to metal parts to prevent rust.
3.Lubricate lower shaft assembly with grease. (Refer to Lubrication instructions on page 13.)
4.Store ProThatch Attachment in a dry place out of reach of children with lower shaft housing in a horizontal or vertical postion to pre- vent grease loss from open shaft end.
Specifications
Model | Pro Thatch Attachment |
Shaft Length | 928 mm (36.5 in.) |
Attachment Width | 565 mm (22.2 in.) |
Attachment | 403 mm (15.9 in.) |
Weight | 9.6 kg. (21.14 lb.) |
Drive | 6.35 mm (0.25 in.) |
Rotating Direction | Away from the operator viewed from the rear |
Dethatcher Head | Left and right reels mounting 22 tines each, totaling 44 tines |
Tines | 3mm (.19 in.) spring steel |
Combing Width | 571 mm (22.5 in.) |
Lithium Base Grease | |
Gear Reduction Ratio | 42.75 : 1 |
Dethatcher Operating | 210 |
Engine Wide Open Throttle (RPM) w/attachment | 7,700 - 8,500 |