ProThatch Attachment 13
Operator's Manual
Maintenance
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.
Your ECHO attachment is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your attachment achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to
skill level
Level 1 = Easy to do. Most required tools come with unit.
Level 2 = Moderate difficulty. Some specialized tools may be required.
maintenance intervals
Component/System |
| Maintenance ProcedureSkill Level | Frequency | |
Drive Shaft | Grease | 1 | Every 25 hours of use |
|
Gear Housing | Grease | 1 | Every 25 hours of use |
|
Tines | Inspect/Tighten/Replace | 1 | Before each use |
|
Screws/Nuts/Bolts | Inspect/Tighten/Replace | 1 | Before each use |
|
lubrication
Level 1.
Tools Required: 13 mm Open End Wrench, Clean Rag
Parts Required: EP "0" or "00" Grease.
Gear Housing
1.Clean all loose debris from gear housing.
2.Remove screw plug (A) and check level of grease.
3.Add grease if necessary, DO NOT over fill.
4.Install screw plug (A).
A
