16 
DETERMINE OPERATION AREA
• | Review the area to be trimmed. Look for hazards that could contribute | 15M (50 FT.) |
| to unsafe conditions. |
|
• | Spectators and fellow workers must be warned, and children and |
|
| animals prevented from coming nearer than 15M (50 ft.) while the |
|
| trimmer is in use. |
|
OPERATION
•Provide all operators of this equipment with the Operator's Manual and Instructions for safe use.
•Before starting the unit, equip yourself and any other person working within the 15M (50 ft.) Safety Zone with the required Protective Equipment and clothing.
•During operation, the complete unit, especially the exhaust area and the bearing housing may become very hot, too hot to touch. Avoid contact during and immediately after operation. Always keep exhaust area clear of flammable debris.
STARTING COLD ENGINE
|
|
|
|
|
|
| WARNING | DANGER |
|
|
|
| The cutting attachment should not rotate at idle. If attachment |
|
|
| |
| rotates, readjust carburetor according to "Carburetor Adjustment" |
|
|
| |
| instructions in this manual or see your ECHO Dealer, otherwise |
|
|
| |
| serious personal injury may result. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. Stop Switch - Start/Run. |
|
|
| A | |
| Move stop switch button (A) away from the STOP position. |
|
| ||
|
|
|
| ||
2.Choke Lever - Cold Start.
Move choke (B) to “Cold Start” Position.
3.Primer - Pump Bulb
Pump primer bulb (C) until fuel will be visible and flows freely in the
clear fuel tank return line. Pump bulb an additional 4 or 5 times. | B |
|
C