Echo GT-201 INTERNATIONAL SYMBOLS, EQUIPMENT

4

INTERNATIONAL SYMBOLS

SYMBOL FORM/	SYMBOL	SYMBOL FORM/	SYMBOL
SHAPE	DESCRIPTION/APPLICATION	SHAPE	DESCRIPTION/APPLICATION
	Read and understand		FUEL AND OIL
	Operator's Manual.		MIXTURE
	WEAR EYES, EARS		FINGER SEVERING
	AND HEAD
	PROTECTION
	HOT		WEAR SLIP
			RESISTANT
	SURFACE
			FOOT WEAR.
	WEAR HAND AND		DO NOT SMOKE
			NEAR FUEL.
	FOOT PROTECTION
	SAFETY/ALERT
		KEEP BYSTANDERS AND HELPERS
		AWAY 15 M (50 FT.).

SYMBOL FORM/	SYMBOL	SYMBOL FORM/	SYMBOL
SHAPE	DESCRIPTION/APPLICATION	SHAPE	DESCRIPTION/APPLICATION

DO NOT ALLOW
FLAMES OR	EMERGENCY STOP
SPARKS NEAR
FUEL.
Engine choke	IGNITION
control.	ON/OFF
PRIMER	CARBURETOR
BULB	ADJUSTMENT
	- HIGH SPEED
	MIXTURE
DO NOT EXCEED	CARBURETOR
	ADJUSTMENT
10,000 RPM.
	- LOW SPEED
	MIXTURE
DO NOT OPERATE
WITHOUT	CARBURETOR
GUARDS AND	ADJUSTMENT
SHIELDS IN	- IDLE SPEED
PLACE.
	BEWARE
DO NOT USE	- THROWN,
	RICOCHET
BLADES. STRING	OBJECTS
LINE ONLY

EQUIPMENT

Before operation a complete check of the unit must be performed;

•Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.

•Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found.

•Inspect shield for damage and ensure that the cut-off knife issecurely in place. Replace if either is damaged or missing.

•Check that the cutting attachment is firmly attached and in safe operating condition.

•Check that front (loop) handle and/or optional shoulder harness are adjusted for safe, comfortable operation. See Assembly for proper adjustment.

•Have repairs done only by an authorized ECHO Service Dealer.

•Do not use any attachment, accessory or replacement part unless it is recommended in the Operator's Manual.