6

EQUIPMENT

WARNING DANGER

Use only ECHO approved attachments for Pro Attachment SeriesTM models. Serious injury may result from the use of a non-approved attachment combination. Read and comply with all safety instructions listed in this manual and attachment manual.

NOTE

ECHO, INC. will not be responsible for the failure of cutting devices, attachments, or accessories which have not been tested and approved by ECHO for use with this Pro Attachment SeriesTM.

•Check unit for loose/missing nuts, bolts and screws. Tightenand/or replace as needed.

•Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found.

•Inspect guards for damage and ensure that they are securely in place. Replace if guard is damaged or missing.

•Check that the attachment is firmly attached and in safe operating condition.

EMISSION CONTROL

EPA Phase 2

The emission control system for these engines are EM/TWC (Engine Modification and Catalyst).

IMPORTANT ENGINE INFORMATION

ENGINE FAMILY: 5EHXS.0234KA DISPLACEMENT: 22.8 cc

EMISSION COMPLIANCE PERIOD: 300 Hours

THIS ENGINE MEETS U.S. EPA PH2 AND 2005 - 2006

CALIFORNIA EMISSION REGULATIONS FOR SORES. REFER

TO OWNER'S MANUAL FOR MAINTENANCE SPECIFICATIONS

AND ADJUSTMENTS.

An Emission Control Label is located on the engine. (This is an EXAMPLE ONLY, information on label varies by engine

FAMILY).

PRODUCT EMISSION DURABILITY

The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.