Echo PAS-230 CONTENTS, ASSEMBLY, ATTACHMENT SHAFT ASSEMBLY

PRO ATTACHMENT SERIESTM

OPERATOR'S MANUAL 9

The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, other assembly may be necessary.

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

1- Power Head w / Upper Drive Shaft Assembly

1- Plastic Bag (co-pack)

-1, BarrierBar

-1, Operator's Manual

-1, Warranty Registration Card

-1, ECHO Emissions and Warranty Statement

-1, Safety Glasses

-1, Echo Power Blend TM 2-stroke oil sample

ASSEMBLY

ATTACHMENT SHAFT ASSEMBLY

Tools Required: None

Parts Required: PAS Attachment Assembly

1.Set Power Head/Shaft Assembly on a level surface.

2.Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock- out position.

3.Remove vinyl cap from attachment drive shaft.

4.Remove cardboard spacer, if necessary.

5.Carefully fit attachment drive shaft assembly into coupler (B) making sure that the inner lower drive shaft engages into the square upper drive shaft socket.

6.Rotate locator pin (A) 1/4 turn clockwise to engage lower shaft hole. Insure locator pin is fully engaged by twisting lower drive shaft. Locator pin should snap flush in coupler. Full engagement will prevent further shaft rotation.

7.Secure lower shaft assembly to coupler by tightening clamping knob (C).