Echo SHC-1700 - Type 1, SHC-1700 - Type 1E, SHC-2100 - Type 1, SHC-2100 - Type 1E, SHC-2400 - Type 1, SHC-2400 - Type 1E, HCA-2400 - Type 1E STOPPING ENGINE (HCA-2400), STOPPING ENGINE (SHC UNITS)

HEDGE CLIPPER 19

OPERATOR'S MANUAL

STOPPING ENGINE (SHC UNITS)

1. Release Throttle. Allow engine to idle for a minute

2.Ignition Switch - STOP. Move ignition switch toggle/slide switch to STOP position.

NOTE

SHC-1700, 2100 with front handle interlock will automatically shut unit off when released.

WARNING DANGER

If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using hedge clipper again or serious personal injury may result.

STOPPING ENGINE (HCA-2400)

1.Release Throttle. Allow engine to idle down and blades stop moving with throttle trigger disengaged.

2.Release "Idle Start Interlock - Move "Ignition Switch" to STOP position.

WARNING DANGER

The engine does not stop when idle start lever is released and throttle trigger is engaged. Release throttle trigger and allow engine to idle down and blades stop moving before releasing idle start interlock lever, otherwise serious personal injury may result.

WARNING DANGER

If engine does not stop during step 2, close choke - COLD START position - to stall engine. Have your ECHO dealer repair Stop Switch before using hedge clipper again or serious personal injury may result.