Grass Trimmer/Brush Cutter19

Operator's Manual

air filter

Level 1.

Parts required: REPOWERTM AIR & FUEL FILTER KIT.

1.Close choke (cold start position). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumu- lated dirt from air cleaner area.

2.Remove air filter cover and air filter retainer from inside cover.

Brush dirt from inside cover.

3.Replace filter if it is damaged, very dirty, or the rubber sealing edges are deformed.

4.Remove foam pre-filter and air filter and clean as indicated below:

Foam Pre-filter

•Clean foam filter in water/detergent solution and rinse with clean water.

• Wrap the filter in a clean, dry cloth and squeeze (do not wring) dry. Allow to dry completely before reuse. Do not oil.

Dual Layer Air Filter

•Lightly brush debris from filter.

•Soak heavily soiled filters in water/detergent solution to loosen dirt, then brush lightly.

•Rinse with clean water and allow to dry completely before reuse.

5.Place foam pre-filter over raised center and inside outer lip of air filter. Install air filter in air filter case.

6.Install air filter retainer on post in air filter cover, flat side up.

7.Install air filter cover and tighten cover knob securely.

fuel filter

Level 1.

Parts required: REPOWERTM AIR & FUEL FILTER KIT.

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal injury may result.

1.Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank.

2.Use the “fuel line hook” to pull the fuel line and filter from the tank.

3.Remove the filter from the line and install the new filter.

NOTE

Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for sale in the United States to be equipped with a special low permeation fuel supply hose between the carburetor and fuel tank. When servicing model year 2012 and later equipment, only fuel supply hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to $37,500 may be enforced for using an un-certified replacement part.

Page 18 Page 20
Page 19
Image 19
Echo SRM-266S, X7502026001 manual Grass Trimmer/Brush Cutter19 Operators Manual, Air filter, Fuel filter, Foam Pre-filter
Page 18 Page 20

SRM-266, SRM-266S, X750018671, X7502026001 specifications

The Echo X7502026001 and X750018671, along with the SRM-266S and SRM-266, represent a remarkable suite of outdoor power equipment that showcases innovative technologies and user-friendly features. These products cater to both professional landscapers and homeowners, providing robust performance in various landscaping tasks.

Starting with the Echo X7502026001, this model stands out due to its powerful engine that delivers exceptional cutting power. It is equipped with a high-efficiency two-stroke engine, ensuring that users can tackle tough jobs with ease. This feature not only enhances performance but also improves fuel efficiency. Additionally, the user-friendly design includes an ergonomic handle that minimizes operator fatigue during prolonged use.

The X750018671, often used in combination with Echo's cutting equipment, is designed to optimize performance and extend the life of the tools. This accessory is known for its durability and precision, making it an excellent choice for those who demand high-quality results.

On the other hand, the SRM-266S and SRM-266 are arming users with innovative technologies that enhance their trimming and cutting experience. The SRM-266S, with its lightweight body, allows for greater maneuverability without compromising power. The engine is designed for easy start, thanks to Echo’s i-30 starting system, which reduces the amount of effort needed to pull the starter rope.

In terms of cutting capability, both the SRM-266S and SRM-266 are equipped with a high-capacity fuel tank and a wide cutting swath, greatly increasing productivity. The two-step air filtration system ensures optimal engine performance by keeping dirt and debris out, extending the overall lifespan of the equipment.

Both models also feature a curved shaft design, allowing users to reach tight spots with ease. This is complemented by a variety of compatible cutting attachments and accessories, which can be easily swapped out for enhanced versatility.

In conclusion, the Echo X7502026001, X750018671, SRM-266S, and SRM-266 represent the pinnacle of outdoor power equipment. With their powerful engines, user-friendly features, and advanced technologies, they are designed to efficiently meet the demanding needs of any landscaping job. Whether for professional use or DIY projects, these models deliver on performance, durability, and ease of use, making them an excellent investment for gardening enthusiasts and professionals alike.
Top Page Image Contents