8

1.POWER HEAD - Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter.

2.GRIP - Rear (right hand) handle.

3THROTTLE TRIGGER LOCKOUT - This lever must be held during starting. Operation of the throttle trigger is prevented unless throttle trigger lockout lever is engaged.

4.STOP SWITCH - "SLIDE SWITCH" mounted on top of the Throttle Trigger Housing. Move switch FORWARD to RUN, BACK to STOP.

5.FRONT HANDLE - The Front (loop) handle is loosely assembled to the Drive Shaft assembly and must be posi- tioned for proper cutting attitude and operator comfort.

6.DRIVE SHAFT ASSEMBLY - Includes the Rear (right hand) Handle assembly, Gear Housing assembly, Front (loop, left hand) Handle assembly, steel drive shaft and Safety Decal.

7.NYLON CUTTER HEAD - Contains replaceable nylon trimming line that advances when the trimmer head is tapped against the ground while the head is turning at normal operating speed.

8.CUT-OFF KNIFE - Automatically trims line to the correct length: 5" after head is tapped on the ground. If trimmer is operated without a cut-off knife, the line will become too long, the engine will overheat, and engine damage may occur.

9.PLASTIC DEBRIS SHIELD ASSEMBLY - Included in plastic bag (co-pack). MUST be installed on unit before use, see Assembly Instructions. Shield assembly includes the Cut-Off Knife. Mounts on the Gear Housing Assem- bly just above the cutting attachment. Helps protect the operator by deflecting debris produced during the trimming operation. This shield must be replaced with the steel shield for blade use.

10.THROTTLE TRIGGER - Spring loaded to return to idle when released. During acceleration, press trigger gradu- ally for best operating technique.

11.SPARK PLUG - Provides spark to ignite fuel mixture.

12.ARM REST - Provides arm rest during operation and protects arm from the hot engine.

13.RECOIL STARTER HANDLE - Pull handle slowly until starter engages, then quickly and firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.

14.Spark arrestor muffler or spark arrestor muffler with catalyst -The muffler or catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris.

15.FUEL TANK - Contains fuel and fuel filter.

16.FUEL TANK CAP - Covers and seals fuel tank opening.

17.CHOKE - The choke control is located on the top of the air filter case. Move choke lever to "Cold Start" () to close choke for cold start. Move choke lever to "Run" () position to open choke.

18.AIR CLEANER - Contains replaceable filter elements.

19.PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge bulb an additional 4 or 5 times.

Page 7 Page 9
Page 8
Image 8
Echo X7502026001, X750018671, SRM-266S manual
Page 7 Page 9

SRM-266, SRM-266S, X750018671, X7502026001 specifications

The Echo X7502026001 and X750018671, along with the SRM-266S and SRM-266, represent a remarkable suite of outdoor power equipment that showcases innovative technologies and user-friendly features. These products cater to both professional landscapers and homeowners, providing robust performance in various landscaping tasks.

Starting with the Echo X7502026001, this model stands out due to its powerful engine that delivers exceptional cutting power. It is equipped with a high-efficiency two-stroke engine, ensuring that users can tackle tough jobs with ease. This feature not only enhances performance but also improves fuel efficiency. Additionally, the user-friendly design includes an ergonomic handle that minimizes operator fatigue during prolonged use.

The X750018671, often used in combination with Echo's cutting equipment, is designed to optimize performance and extend the life of the tools. This accessory is known for its durability and precision, making it an excellent choice for those who demand high-quality results.

On the other hand, the SRM-266S and SRM-266 are arming users with innovative technologies that enhance their trimming and cutting experience. The SRM-266S, with its lightweight body, allows for greater maneuverability without compromising power. The engine is designed for easy start, thanks to Echo’s i-30 starting system, which reduces the amount of effort needed to pull the starter rope.

In terms of cutting capability, both the SRM-266S and SRM-266 are equipped with a high-capacity fuel tank and a wide cutting swath, greatly increasing productivity. The two-step air filtration system ensures optimal engine performance by keeping dirt and debris out, extending the overall lifespan of the equipment.

Both models also feature a curved shaft design, allowing users to reach tight spots with ease. This is complemented by a variety of compatible cutting attachments and accessories, which can be easily swapped out for enhanced versatility.

In conclusion, the Echo X7502026001, X750018671, SRM-266S, and SRM-266 represent the pinnacle of outdoor power equipment. With their powerful engines, user-friendly features, and advanced technologies, they are designed to efficiently meet the demanding needs of any landscaping job. Whether for professional use or DIY projects, these models deliver on performance, durability, and ease of use, making them an excellent investment for gardening enthusiasts and professionals alike.
Top Page Image Contents