How to operate the Sound Adjustment Mode

Multi-harmonizer

When original sounds are converted to MP3/WMA and Memory Stick (ATRAC3) format, frequency ranges that are not normally audible to the human ear are compressed. The multi-harmonizer can be used to play back these compressed sounds at as close to their original form as possible so that clear and powerful sound can be enjoyed.

Non-fader phase

The sounds that are output from woofers include sounds that are in the same frequency ranges that are output from the front and rear speakers, and under the various conditions that can occur inside vehicle compartments, some of these sounds may cancel each other out. This phenomenon can be eliminated by changing the phase of the woofer.

The phase of the woofer can be set to normal timing (in which the

 

output timing between the front and rear speakers and the woofer is

 

the same) or reverse timing (in which the output timing between the

 

front and rear speakers and the woofer is different), depending on

 

the vehicle compartment conditions.

IX

Non-Fader output

 

Depending on your external amplifier, non-fader output may be

 

stereo or mono.

 

Speaker layout

 

The speaker layout can be configured as a 3-way or 4-speaker

 

system.

 

E-iSERV sound effect customizations

 

The parametric equalizer, time alignment, and crossover setting can

 

be adjusted using this deck, or through the Eclipse web site.

 

(Settings can be stored on CD-R or Memory Stick.)

 

125