ESN security operating procedure

 

 

[DISC] button

 

 

[FUNC] button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Button [6]

III

Canceling the security function using a Memory Stick

Check that the unit is in standby.

Press and hold the [FUNC] button, then button [6], and hold both for more than one second.

A [SEC] message appears, then in two seconds it will change to [- - - -] (Security code input display).

Press the [DISC] button.A [MS] message will appear.

If a Memory Stick has already been inserted, a [MS EJECT] message appears. In this case, eject the Memory Stick and insert again. (Refer to "Ejecting the Memory Stick" on page 96 for details on ejection of the Memory Stick.)

Insert the Memory Stick and close the front panel.The recorded data will be read from the Memory Stick.

If the contents recorded in the Memory Stick match the information recorded by the deck, [CANCEL] will appear on the display.

The security function will be canceled and the deck will return to normal operation.

●If a reading error occurs or if an incorrect Memory Stick is inserted,

[ERR] will appear on the display for two seconds, and then the display will change to [EJECT]. If this happens, eject the Memory Stick and try again.

●Security setting cannot be canceled by this procedure if the Memory Stick containing the security code is formatted.

Eject the Memory Stick.

Refer to "Ejecting the Memory Stick" on page 96.

33