Heat Mode (HS Model Only) The AP14000HS portable air conditioner can work as a heat pump. It
| must be vented for it to expel the cold air out the exhaust. | ||
| To operate the unit in heat mode: |
| |
| 1) | Make sure the power cord is plugged into a power outlet. | |
| 2) | Press the Power button. |
|
| 3) | Press the Mode button until the | Heat indicator is selected. |
| 4) | Adjust the fan speed and temperature to your desired setting. The | |
| thermostat is adjustable between 61°F - 80°F in one degree increments. | ||
| Note: The room temperature remaining below the set temperature is | ||
| normal. Whether your desired temperature can actually be reached | ||
| depends on the ambient conditions |
| |
|
| ||
Fan Only Mode | Fan Only mode is used to circulate the air in your room. No temperature | ||
| setting is needed. |
|
To operate the unit in Fan Only mode:
1)Make sure the power cord is plugged into a power outlet.
2)Press the Power button.
| NOTE: Fan Only mode does | 3) Press the Mode button until the | Fan Only indicator is selected. | ||
| not require that the exhaust | 4) Press the Speed button to select the fan speed. |
| ||
| hose be attached. | You can choose between | Low, | Medium and | High fan speeds. |
|
| ||||
|
|
| |||
|
|
| |||
| Speed | The Speed button is used to change the fan speed while in Cooling and | |||
|
| Fan Only modes. |
|
|
|
|
| Press the Speed button to select the fan speed. |
| ||
|
| You can choose between | Low, | Medium and | High fan speeds. |
|
|
| |||
| Timer | The timer can be used to either turn the unit on or off after a number of | |||
|
| elapsed hours. The timer is adjustable between |
increments.
How to set the unit to automatically turn on:
1) Press the Timer button while the unit is powered off. The Timer
|
| indicator will appear on the LCD. | |
|
| 2) Use the Up and Down buttons to set the time (displayed in hours) you | |
|
| wish to pass before the unit turns on. After the selected time passes, the | |
|
| unit will automatically turn on. | |
|
| How to set the unit to automatically turn off: | |
|
| 1) Press the Timer button while the unit is powered on. The Timer | |
| NOTE: To cancel the | indicator will appear on the LCD. | |
| 2) Use the Up and Down buttons to set the time (displayed in hours) you | ||
| timer, press the Timer | ||
| wish to pass before the unit turns off. The unit will automatically turn off | ||
| button or Power button. | ||
| after the selected time elapses. | ||
|
| ||
|
|
|
|
Water Light | In high humidity situations, the internal water reservoir may fill. The unit | |
| will automatically shut off and the water light will turn on. The | Stop |
| Indicator will appear on the LCD. Once the water is manually drained, the | |
| unit will operate normally. |
|
|
| |
EdgeStar Portable Air Conditioner | 12 |