Fan Only Mode | Fan Only mode is used to circulate the air in your room. No |
| temperature setting is needed. |
To operate the unit in Fan Only mode:
1)Make sure the power cord is plugged into a power outlet.
2)Press the Power button on the remote control.
NOTE: Fan Only mode does | 3) Press the | Mode button until the Fan Only indicator is | |
not require that the exhaust | |||
selected. |
| ||
hose be attached. |
| ||
| 4) Press the | Speed button to select the fan speed. |
You can choose between Low, Medium and High speed.
Heat Mode (HS Model Only) The AP14000HS model portable air conditioner can work as a heat pump. It must be vented for it to expel the cold air out the exhaust.
To operate the unit in heat mode:
1)Make sure the power cord is plugged into a power outlet.
2)Press the Power button on the remote control.
3)Press the Mode button until the Heat indicator is selected.
4)Select the fan speed by using the Speed button.
NOTE: The exhaust hose must 5) Change the set temperature by using the Up and Down
be used in Heating Mode buttons. The temperature is adjustable between 61°F - 80°F in one degree increments. You can switch between Fahrenheit and
Celsius by pressing the button.
Fan Speed | The | Fan Speed button is used to change the fan speed while |
| in Cooling, Fan Only and Heating (HS Model only) modes. | |
| Press the | Fan Speed button to select the fan speed. |
You can choose between Low, Medium and High speed.
Note: Although the remote control will allow you to set the fan speed in Dehumidify mode, the unit will not actually change the fan speed.
EdgeStar Portable Air Conditioner | 16 |