EdgeStar AP14000W owner manual Using the Control Panel, Power, Cooling Mode, Dehumidifying Mode

Models: AP14000W

1 27
Download 27 pages 61.87 Kb
Page 14
Image 14
Using the Control Panel

 

 

Using the Control Panel

Power

Use the Power button to turn the portable air conditioner on and off.

 

 

 

 

By default when you first use the power button, the unit should begin to

 

 

operate in cooling mode. The unit will remember the last used

 

 

mode/settings if you shut down and restart.

 

 

Auto-Restart:If power to the unit is interrupted, the air conditioner will

 

 

restart itself in its last used mode/settings once power is restored. The

 

 

compressor will restart after 3 minutes.

 

 

 

 

Cooling Mode

Cooling mode cools and dehumidifies the air. If the ambient temperature

 

 

drops below the temperature you selected, the compressor turns off and

 

 

the unit functions with the fan only. When the temperature rises above the

 

 

temperature you selected, the compressor turns on again.

 

 

Whether your desired temperature can actually be reached depends on

 

 

the ambient conditions. The room temperature remaining above the set

 

 

temperature is normal.

To operate the unit in cooling mode:

1)Make sure the power cord is plugged into a power outlet.

2)Press the Power button.

NOTE: The exhaust hose

3)

Press the Mode button until the

Cooling indicator is selected.

must be used in Cooling

4)

Select the fan speed by using the Speed button.

mode in order to cool a

You can choose between Low,

Medium and High fan speeds.

room.

 

 

 

5)Set the thermostat by using the Up and Down buttons. The thermostat is adjustable between 61°F - 89°F in one degree increments.

Dehumidifying Mode

During the Dehumidifying mode, the unit will condense water out of the air

and exhaust it through the exhaust hose. . In high humidity conditions,

 

 

you may need to manually drain the unit. The ambient temperature in the

 

room will probably drop by a few degrees while using the Dehumidifying

 

mode.

To operate the unit in dehumidifying mode:

1)Make sure the power cord is plugged into a power outlet.

2)Press the Power button.

3)Press the Mode button until the Power Dehumidify indicator is selected.

NOTES: If the room temperature is below 77ºF, the fan will always run on low speed while in the Dehumidifying mode. If you do not use the exhaust hose in Dehumidifying mode, you must manually drain the water from the unit. Additionally, the ambient temperature in the room will probably rise by a few degrees if you do not use the exhaust hose. You will be not be able to change the thermostat temperature while in Dehumidifying Mode.

11

Page 14
Image 14
EdgeStar AP14000W owner manual Using the Control Panel, Power, Cooling Mode, Dehumidifying Mode