To remove door from hinges:
1.Using a Phillips screwdriver, remove the screws and take off top hinge. Keep the parts together and set them aside.
3.Lift door off bottom hinge and turn it upside down so that the handle is on the right. Set door aside.
To replace door on hinges:
1.Using a flathead screwdriver, remove the plug buttons from the screw holes opposite the door hinges, top and bottom. Set aside.
2.Remove the bottom hinge, place on the opposite side at the bottom of the door.
3.Position the door on the bottom hinge.
4.Align the door on the bottom hinge and replace the top hinge.
5.Push the plug buttons into the original screw holes. See Figure below.
Water Supply Connections
The water supply should be ready at the point of installation. The water supply pressure should be a minimum of 15 psig with a static pressure not more than 80 psig. (A wall outlet directly behind the ice maker will make installation easier.)
13
