Before you move your icemaker into its final location, it is important to make sure you have the proper electrical connection:
A standard electrical supply (115 V, 60Hz.), properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required.
It is recommended that a separate circuit, serving only your icemaker, be provided. Use receptacles that cannot be turned off by a switch or pull chain.
The fuse (or circuit breaker) size should be 3 amps.
Recommended grounding method
For your personal safety, this appliance must be grounded. It is equipped with a power supply cord having a
Leveling the Ice Maker
It is important for the icemaker to be leveled in order to work properly. It can be raised or lowered by rotating the plastic sheaths around each of the four feet on the bottom of the machine .If you find that the surface is not level, rotate the feet until the ice maker becomes level .You may need to make several adjustments to level it. We recommend using a carpenter’s level to
check the machine.
1.Place a carpenter’s level on top of the product to see if the ice maker is level from front to back and side to side .
2.Adjust the height of the feet as follows:
Turn the leveling feet to the right to lower that side of the ice maker Turn the leveling feet to the left to raise that side of the ice maker .
IMPORTANT: Once you are ready to install it in a cabinet or directly on the floor, you must adjust the feet to level the ice maker. If the floor is level, just revolve the two front feet to touch the floor.
Reversing the Door Swing
Tools needed: flathead screwdriver, Phillips screwdriver
IMPORTANT: Before you begin, unplug the ice maker or disconnect power.
12
