User Community, Public, User Access | Edimax Technology EW-7205AP

Wireless LAN Access Point Configuration

Parameters/Buttons	Description
Operational Mode	Sets this Access Point to following operational mode.
	• Access Point
	• Access Point Client
	• Wireless Bridge
User Community	Indicates the user’s password. The default password is
	“public”.
User Access	Indicates the user’s access rights. You can restrict the
	user to read only.
Administrator	Indicates the administrator’s password. The default
Community	password is “public”.
Administrator Access	Indicates the Administrator’s access rights.
Manufacturer	Indicates the manufacturer’s password.
Community
Manufacturer Access	Indicates the manufacturer’s access rights.
Gateway IP Address	Network Gateway.
IP Filtering	When this is enabled, only IP protocol packets can pass
	through the Access Point.
DHCP Client	When this is enabled, the IP Address of the Access Point
	will be assigned by a DHCP Server automatically.
Primary Port	The interface connected to the DHCP Server.

Authorization Algorithm Enable/Disable the authorized MAC Address stations to

connect to the Access Point.

12

Image 14

Edimax Technology EW-7205AP Parameters/Buttons Description Operational Mode, User Community, Public, User Access

Contents

Wireless LAN Access Point Table of Contents Package Contents Features Specifications Front Panel System RequirementPhysical Description Back Panel Description Introduction Locate an optimum location for the Wireless LAN Access Point Hardware Installation is complete Access Point Snmp Manager How to Install the AP UtilityUsing the AP Utility AP Utility For Example Regulatory Domain Wireless MAC AddressParameters Description MAC Address Ethernet IP Address Wireless RTS Threshold Wireless ChannelWireless Fragmentation Parameters Description Auto Rate Fall Back Operational Rate Set Parameters/Buttons Description Authentication TypeAccess Point Name Beacon Period Administrator Parameters/Buttons Description Operational ModeUser Access Administrator Access Parameters/Buttons Description Snmp Traps WEP 128 keys #1-#4 Access Point Snmp Manager How to Install the Snmp Manager Wireless LAN Access Point Configuration Wireless LAN Access Point Configuration Wireless LAN Access Point Configuration Using the Snmp Manager Default IP Address Default Sub Mask Connecting to the Access Point Connect to the Access Point Find Access Point Configuring the Access Point Download Changes Refresh IP ConfigurationFiltering Configuration Operational Settings Privacy Options Essid Both Open SystemShared Key Modify Authorized MAC Address Enable Snmp Traps Authorization Password Setting Viewing the Wireless Statistics Polling Interval Reset DeviceRestore Default Associated Station Wireless Statistics Ethernet Statistics Wireless LAN Access Point Firmware Upgrade Tftp Client Tftp Client How to Install the Tftp ClientUsing the Tftp Client Wireless LAN Access Point Firmware Upgrade What is Ad-hoc? Can the Wireless Access Point act as my Dhcp Server?Can the Wireless Access Point connect to PC directly? What is Infrastructure? Can data be intercepted while transmitting through the air? What is WEP?What is a MAC Address?