i-WATCHER Installation Method 6:
Internet Access Mode: Dial-up ADSL or Cable Modem
Real IP Address: A set of dynamic IP addresses provided by the ISP
IP Sharing or LAN Hub: Must come with DHCP and NAT function
i-WATCHER Network Setup: LAN Enable (Manually)
Web Server Port Number (Setting required)
User: 1 Static IP address and multiple i-WATCHER
installed
z Check ADSL dial-up properties from the ISP, ISP details: ADSL User-id and password.
z Connect the given BLUE cable to your i-WATCHER and PC, and use the IPEDIT in the
CD-ROM to set up the i-WATCHER
z Please refer to Page 3 for IP address setting.
z Launch IE browser of the designated PC, go to Network Setup, PPPoE to fill in the
User-id and the password
z Click on Submit and wait for 5 seconds, disconnect the i-WATCHER power supply and
install the Dial up ADSL Modem
z Run ‘IPEDIT’ and locate the i-WATCHER’s IP address assigned by the ISP
z Launch IE browser and enter the Static IP address of the i-WATCHER, e.g.:
http://230.80.86.01
z Follow the sequence settings for each i-WATCHER
41