Electrolux 5995421640 Drain Installation

CACA

CAUTIONUTION

UTIONUTION

UTION

PLEASE READ all instructions completely before attempting to install or operate the

unit. All ice makers require a connection to the water supply and improper hook-up can

result in substantial property damage! All water and drain connections MUST BE made

by a licensed/qualified plumbing contractor. Failure to follow recommendations and

instructions may result in damage and/or harm.

CACA

CAUTIONUTION

UTIONUTION

UTION

Plumbing installation must observe all state and local codes. All water and drain

connections MUST BE made by a licensed/qualified plumbing contractor. Failure to

follow recommendations and instructions may result in damage and/or harm.

Drain Installation

Model E15IM60E can be installed using a gravity drain or can use a factory installed

or equivalent drain pump.

Follow these guidelines when installing drain lines to prevent water from flowing

back into the ice maker storage bin and/or potentially flowing onto the floor causing

water damage:

Gravity Drain

• Drain lines must have a 5/8 inch inside diameter.

• Drain lines must have a 1 inch drop per 48 inches of run (1/4 inch per foot) and

must not create traps.

• The floor drain must be large enough to accommodate drainage from all

drains.

• Insulate the bin drain line to prevent condensation.

Ice Makers With Factory Installed Drain Pump

CACA

CAUTIONUTION

UTIONUTION

UTION

Before installing an icemaker with a factory installed pump, it is extremely important to

check and test all hose connections at the drain pump. There is a possibility that hose

connections may have loosened during shipment.

WARNINGWARNING

WARNING

To prevent accidental electrocution, make certain that the floor surfaces surrounding

the unit are dry whenever power is removed from, or applied to the unit.