8.8Configuring DHCP Parameters
The print server can be configured as DHCP server to provide dynamic IP addresses assignment. The DHCP Cfg page allows you to set.
The DHCP server startup, which determine if the print server will act as DHCP server. If this item is set to Auto, the print server will detect if there is any other DHCP server on the network when it boots up. If there is no DHCP server on the network, then the print server will configure as DHCP server itself; otherwise it will disable this function.
DHCP setting is used to configure TCP/IP parameters that will be assigned to a DHCP client. If this item is set to Auto, the print server will determine all TCP/IP parameters
103
