Setup Print Server’s IP Address | Edimax Technology PS-3103P

6.3Setup Print Server’s IP Address

The print server must have a unique IP address in order to be recognized by the network.

You can set up the IP address on the various Unix systems using any one of the following methods:

1.ARP & Ping Assignment (Recommend for Unix)

2.DHCP (Dynamic Host Configuration Protocol)

3.BOOTP (Bootstrap Protocol)

4.RARP (Reverse Address Resolution Protocol)

The print server will use the last three methods to obtain its IP address automatically if its IP address is configured as Auto (0.0.0.0).

You can use ARP and Ping commands with a web browser to complete print server’s IP address setting.

Parameters for the commands are as follows:

arp –s <IP Address> <Ethernet ID>

ping <IP Address>

For example, a print server with the following configuration:

Node ID: 0000B4010101