Efficient Networks® 5800 Series
User Reference Guide
Chapter 2: Easy Setup
Efficient Networks®Page 2-13
1. If you have selected RFC 1483 MER (MAC Encapsulated Routing)
as your WAN protocol, you will see a screen for selecting
networking options, and for setting IP routing configurations.
2. Choose either Bridging enabled or IP routing enabled. If you
choose bridging, all traffic to remote computers that is not routed
will be bridged. You also have the option to only bridge PPPoE
(PPP over Ethernet) traffic.
3. If you have chosen to have IP routing enabled, you must now
choose to obtain your IP configuration automatically from a DHCP
server on the WAN, or to configure your IP routing manually. To
configure IP routing manually, you must enter a unique IP address
and subnet mask for your router.
4. As options, you can choose NAT enabled to activate NAT (Network
Address Translation) and Block NetBIOS traffic.
5. If your Network Service Provider has not provided specifics for use
in making these settings, choose IP Routing, Ob tain configuration
automatically from WAN, and NAT enabled.
6. Click on th e Next button to continue Easy Setup.