Efficient Networks® 5800 Series
User Reference Guide
Chapter 2: Easy Setup
Efficient Networks®Page 2-7
If you have selected PPPoEoA as your WAN protocol, you will see a screen
requesting a PPP user name and a PPP password. You should have received this
information from your service provider.
1. Enter your user name and password in the fields indicated.
2. PPPoE Service Name requires the domain name of your network
service provider. Use as a default * (for all services). Enter the
domain name of your network service provider in the Service Name
field.
3. PPPoE Timer will set a timeout interval for periods of inactivity.
After the number of seconds elapses, the PPP connection closes to
limit timed connection charges from your service provider. Enter
the timeout interval (measured in seconds) into the PPPo E Timer
field. The default entry of “permanent” will keep the PPP
connection open constantly, with no timeout interval.
4. PPPoE Only Filter will filter all traffic on the bridge to allow
PPPoE only. Check this box if you will only connect to your
network service using PPPoE.
5. Click on th e Next button to continue Easy Setup.