Commands, Codes, and Protocols 37
Result Codes
S27 General Bit Mapped Options Status 73 (49h)
S28 General Bit-Mapped Options Status 0
S30 Disconnect Inactivity Timer 0
S31 General Bit-Mapped Options Status 194
S32 XON Character 17 (11h)
S33 XOFF Character 19 (13h)
S36 LAPM Failure Control 7
S37 Line Connection Speed 0
S38 Delay Before Forced Hangup 20
S39 Flow Control Bit Mapped Options Status 3
S40 General Bit-Mapped Options Status 104 (68h)
S41 General Bit-Mapped Options Status 195
S46 Data Compression Control 138
S48 V.42 Negotiation Control 7
S82 LAPM Break Control 128(40h)
S86 Call Failure Reason Code -
S91 PSTN Transmit Attenuation Level 10
S92 Fax Transmit Attenuation Level 10
S95 Result Code Messages Control 0
S201 Cellular Transmit Level 58
Code Long Form Meaning
0 OK Command executed OK
1 CONNECT Connection at 0 to 300 bps
2 RING Ringing detected
3 NO CARRIER Carrier lost or not detected
4 ERROR Improper command or checksum
5 CONNECT 1200 Connection at 1200 bps
6 NO DIALTONE No dial tone detected
7 BUSY Busy signal detected
8 NO ANSWER Period of silence not detected
Register Function Default