Setup: USB Setup | Page 10 |
USB Setup
Note: The USB port can only be used with systems running Windows 98,
Windows 2000, or Windows Me.
If you are using Windows 98, Windows 2000, or Windows Me, you have the option of connecting the device to your computer’s USB port. This is described in the following procedure.
Once set up, you can then connect a second computer that supports Ethernet to the Diva 2430’s Ethernet port. To ensure a smooth installation, first install a computer using one port only, to make sure the device is working properly.
Note: The Diva 2430 does not support USB under Windows 95, Macintosh, or other operating systems. For these systems, see Ethernet Setup on page 15.
Setup involves the following steps: |
|
Step 1: Connect the Cables | 11 |
Step 2: Install USB Drivers | 12 |
Step 3: Test Internet Access | 14 |
