Eicon Networks Diva 2430

Setup: Ethernet Setup Page 15

Ethernet Setup

The procedure in the following section describes how to set up the Diva2430 using

any system equipped with an Ethernet card and capable of communicating via the

TCP/IP protocol. This includes Windows, Macintosh, and Linux. This procedure

assumes your Ethernet card is installed according to the manufacturer’s instructions.

In This Section

Step 1: Connect the cables.................................................................... 16

Step 2: Test Internet Access..................................................................17

Contents

Main Fourth Edition (March 2001) 206-362-04 Contents Page Introducing the Diva 2430 ADSL Modem Setup and Configuration Features ADSL and Network Features Hardware Features Packag e Contents Setup In This Section Overview Connecting to Both Ports Hardware Requirements Software Requirements Connecting Microfilters About Microfilters Connecting the Microfilters USB Setup Step 1: Connect the Cables Step 2: Install USB Drivers Page Step 3: Test Internet Access Page Step 1: Connect the cables Step 2: Test Internet Access Optional: Install the Diva Assistant Page LAN Setup Install using a single computer recommended DHCP Server Cables PPPoE Software Page Configuring Settings via the Web Interface Logging into the Web-based Configuration Interface Using the Configuration Menus ATM S ett ing s Page TCP/IP Setup Windows 95/98 Windows NT 4.0 Windows 2000 Macintosh (Mac OS 8 or later) Troubleshooting I cant access the Internet. I cant access the web-based configuration interface. The power light is blinking red. Page About the Diva Assistant Launching the Diva Assistant Notes System Tray Icon The General tab is the first tab you see when you open the Diva Assistant. General Tab Performan ce Tab Tool s Tab Diagnostic Log Tab Indicator Lights Resetting the Device Normal Reset Reset Settings to Factory Defaults Boot Monitor Mode Page Overview Starting the Web-based Configuration Interface Save, Reset Form, and Cancel Buttons Reset and Logout buttons on the main menu Getting Help Saving and restoring configuration files Upgrading Firmware Backing up Configuration Files Opening to the Firmware Maintenance Page Retrieving Firmware from the Eicon Networks Web Site Uploading New Firmware Resetting to Factory Defaults Page Security Automatic Log Out System password Setting a Password Erasing the system password Disable Inbound Server Requests Enabling this Option IP Traffic Only Enabling this Option Virtual Private Networking Before you Begin Setting up a VPN with Windows 95 or Windows 98 Setting up a VPN with Windows 2000 Page Page Page Page Specifications General Specifications Software and Firmware Specifications Page Page Regulatory Information for the United States Declaration of Conformity FCC Part 68 Notice Safety Notice Regulatory Information for Canada Safety Notice Regulatory Information for the European Union Safety Status: TNV-3 Power Consumption