Switching the Input Mode

Select the appropriate input mode for the connected equipment.

Press COMPUTER, DVI, S-VIDEO or VIDEO on the remote control to select the input mode.

•When you press INPUT on the projector or DVI

on the remote control, the INPUT list appears. Press P/R to switch the INPUT mode.

COMPUTER, DVI,

S-VIDEO, VIDEO buttons

AV MUTE button

VOL +/– (Volume) buttons

Adjusting the Volume

Press VOL +/– on the remote control or –O/Q+ on the projector to adjust the volume.

Note

• Pressing VOL–/–O will lower the volume.

 

• Pressing VOL+/Q+ will raise the volume.

On-screen display

• When the projector is connected to external

 

equipment, the volume level of the external

 

equipment changes in accordance with the

 

volume level of the projector. Set the projector's

 

volume to the lowest level when turning the

 

projector on/off or when changing the input signal.

 

• When you do not want to output the sound

 

from the projector's speaker while the

 

projector is connected to external equipment,

 

set “Speaker” in “PRJ-ADJ” menu to “Off”.

 

(See page 46.)

 

 

 

 

 

Displaying the Black Screenand Turning Off the SoundTemporarily

Press AV MUTE on the remote control or close the lens shutter to temporarily display a black screen and turn off the sound.

Note

On-screen display

•Pressing AV MUTE again will turn the projected image back on.

•When you close the lens shutter, the projector will be AV MUTE mode and then the projector will be turned off automatically after about 30 minutes.

29