Setting up the Projector Network Environment (“Network” Menu) (Continued)
Menu operation n Page 38
2 DHCP Client Setting
Connect the LAN cable before turning the projector on. If not, the DHCP Client function does not work.
Selectable items | Description |
On | Obtains confi guration |
| parameters for TCP/IP network |
| automatically. |
Off | Sets the TCP/IP manually. |
Select “On” for “DHCP Client”. “Obtaining IP Address...” appears, then the menu screen appears. Confirm the parameters of IP Address, Subnet Mask and Gateway on the TCP/IP screen.
If the DHCP server is not available, “Could not obtain IP Address.” appears.
In this case, set the TCP/IP manually. (See the item 3.)
3 TCP/IP Setting
Set the TCP/IP manually.
1
Select “Off” for “DHCP Client”, 
then press ENTER.
2
Select “TCP/IP”, then press
ENTER.
3
Enter “IP Address” using P, R, Q and O, then press ENTER.
|
|
|
|
|
| Network |
|
|
| ||
| Setting the TCP/IP |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| IP Address | 1 | 9 | 2 | . | 1 6 8 | . 1 5 0 | . 0 0 2 |
| ||
| Subnet Mask | 2 5 5 | . | 2 5 5 | . | 2 5 5 | . | 0 0 0 |
| ||
| Gateway | 0 0 0 | . | 0 0 0 | . | 0 0 0 | . | 0 0 0 |
| ||
4
Enter “Subnet Mask” using P, R,
Q and O, then press ENTER.
5
Enter “Gateway” using P, R, Q and O, then press ENTER.
Selectable items | Description |
|
|
IP Address | Factory default setting: |
| 192.168.150.002 |
| Enter an IP address |
| appropriate for the network. |
Subnet Mask | Factory default setting: |
| 255.255.255.000 |
| Set the subnet mask to the |
| same as that of the computer |
| and equipment on the |
| network. |
Gateway | Factory default setting: |
| 000. 000. 000. 000 |
| * When not in use, set to “000. |
| 000. 000. 000”. |
Note
•Confi rm the existing network's segment (IP address group) to avoid setting an IP address that duplicates the IP addresses of other network equipment or computers. If “192.168.150.002” is not used in a network with an IP address of “192.168.150.XXX”, you don't have to change the projector IP address.
•For details about each setting, consult your network administrator.
4Confirming the Projector Information
You can confirm the MAC address and projector name.
Selectable items | Description |
MAC Address | The MAC address of the |
| projector is displayed. |
|
|
Projector | The projector name is |
| displayed. |
Note
•For information on how to change the projector name, see “SETUP MANUAL” contained in the supplied
50