Appendix
WARNING FILTER indicator
Indicators
POWER | LAMP | WARNING | |
FILTER | |||
green | red | ||
orange | |||
|
|
Projector Condition
Filter warning red icon
The filter is clogged. Stop using the projector immediately and clean or replace the filter (see below).
– –
Filter warning yellow icon
The Filter counter reached a set time. Clean or replace the filter as soon as possible.
If filter clogging is detected during operations, the Filter warning icon (red) appears on the screen and the WARNING FILTER indicator blinks orange, urging you to clean or replace the filter. Stop using the projector immediately and clean or replace the filter. The WARNING FILTER indicator and Filter warning icon will not be turned off until the filter is cleaned or replaced by a new one.
Filter warning icon (red) appears on the screen when the projector detects filter clogging.
✔Note:
•The Filter warning icon (red) will not appear during “Freeze” (p.30), or “No show” (p.31).
LAMP REPLACE indicator
| Indicators |
| ||
POWER |
| LAMP | LAMP | Projector Condition |
| REPLACE |
| ||
green |
| red |
| |
| yellow |
| ||
|
|
|
| |
|
|
|
|
|
|
|
|
| The lamp cannot light up. (The projector is preparing for |
|
|
|
| the projection lamp is being cooled down. The projector cannot be |
|
|
|
| turned on until cooling is completed.) |
|
|
|
|
|
|
|
|
| The lamp cannot light up. (The lamp has been cooled down enough |
|
|
|
| and the projector is in |
|
|
|
| the |
|
|
|
|
|
– |
| – |
| The lamp has been used overtime. Replace the lamp immediately |
|
| and then reset the lamp counter. The indicator will be turned off after | ||
|
|
|
| resetting the counter. |
|
|
|
|
|
*When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp counter after replacing the lamp. See pages
69
