LED Indicators, Power Indicator Green LED

User Manual

1.3 LED Indicators

Power Indicator (Green LED):

The LED will light up when the device is connected to a network (an AP or Peer-to-Peer). The LED will blink when the device is scanning for all available networks.

Act Indicator (Green LED):

The LED will flicker when there is transmitting/receiving of wireless data.

Page 4 of 24

Page 4

Image 4

Aztech Systems WL630PCI user manual LED Indicators, Power Indicator Green LED, Act Indicator Green LED

Contents

WL630PCI Wireless B/G PCI Card FCC Certification Part15, Class B Package Contents Introduction to WL630PCI Wireless B/G PCI CardFeatures Power Indicator Green LED LED IndicatorsAct Indicator Green LED Installation Install the Driver & UtilitySystem Requirements Click Here Below screen will be shown. Click Next to continue Click Here For Windows 98SE/ME Install the DeviceFor Windows For Windows XP Verify Installation Uninstallation Go to Start Æ Settings Æ Control Panel Æ Network Windows 98SE/MEPage Windows 2000/XP IP Address Configuration Utility You check the Configure using Windows Zero Configuration Built-in Windows Zero Configuration Utility WZCMain Tab None ConnectAny WPA TLS Personal Certificate To supply a Personal Certificate Medium-Low Power 12% Medium-Power 25%Medium-High Power 50% High Power 100% New Profile Manager TabEdit Information Tab Example of connection to an Access Point Click OK to exit the WEP Configuration

Aztech Systems WL630PCI LED Indicators, Power Indicator Green LED, Act Indicator Green LED

Models: WL630PCI

1.3 LED Indicators

Power Indicator (Green LED):

Act Indicator (Green LED):