User Manual
6 Example of connection to an Access Point
1.At the Main tab, highlight one of the devices from the list area that you wish to connect and then press the Connect button to access it.
2. The Profile Configuration window will be displayed so that you can create a profile.
3.The SSID name will appear on the Profile Name. You can change the Profile Name if you wish to.
4.Select Personal for Super Profile and select Open for the Authentication Mode.
5.Select None for the Security if the network does not require special security settings and access rights in order to connect to it. Please proceed to Step 11 on Page 20.
6.Select WEP for the Security if the network requires special security settings and access rights in order to connect to it. Then, click on Configure… to set the WEP Configuration.
Page 23 of 24
