User Manual
| Item |
| Description | |
|
|
|
|
|
Tx Rate /Rx |
| The actual instantaneous transmit and receive rates, in Mbps. | ||
| Rate |
|
| |
Signal quality |
| The signal strength from the network Access Point or station. The | ||
|
|
|
| strength is displayed in three formats: a signal quality level (one of five |
|
|
|
| levels, from Bad to Best), a numerical value in dBm, and a signal quality |
|
|
|
| bar graph with a scale of |
| Connect |
|
| Highlight one of the devices from the list area and then press the |
|
|
|
| Connect button to access it. |
Profile Name: Enter the profile name you wish to have.
Set Configuration: The Set Configuration area contains the following fields
SSID Name: The SSID for the current profile
BSS Type: The BSS type, either
Channel: The preferred channel on which to make a connection (available for
Band: The band on which to make a connection.
Super Profile：Determines the security settings available to you, and can be one of the following:
Personal: Enables only the basic security settings that you are likely to need at home.
Enterprise: Enables all security settings, including more complex
Security: Determines the type of security to use for this connection, and can be one of the following:
None
WEP
WPA2
Any WPA
WEP: Wired Equivalent Privacy (WEP) is a data security mechanism based on a 64 Bit/128 Bit/256 Bit shared key algorithm.
Press the Configure button to change WEP configuration.
Note: You must use the same Default Key #, Key Size, and Encryption Key on both the host and destination devices in order to establish a connection.
KEY1 ~ KEY 4: You can specify up to 4 different keys, but only one can be used at a time.
Encryption: Enter the key value in this field.
Page 17 of 24
