Eiki LC-UXT1 instruction manual Video Input, When Select Input 2 5 BNC Slot

VIDEO INPUT

SELECTING INPUT SOURCE

WHEN SELECT INPUT 2 (5 BNC SLOT )

When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from video equipment to R/Pr, G/Y and B/Pb jacks.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button to move a red frame pointer to
	INPUT Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to Input
	2 and then press SELECT button. Source Select Menu will
	appear.
3	Press POINT DOWN button and a red-arrow icon will appear.
	Move arrow to "Y, Pb/Cb, Pr/Cr" and then press SELECT button.

INPUT MENU

INPUT Menu icon

Move a pointer (red arrow) to Input 2 and press SELECT button.

Input 2

Source Select Menu

Move a pointer to

Y, Pb/Cb, Pr/Cr and press

SELECT button.

WHEN SELECT INPUT 3 (AV TERMINAL )

When connecting to those equipment, select a type of Video source in SOURCE SELECT (VIDEO) Menu.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button to move a red frame pointer to
	INPUT Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to Input
	3 and then press SELECT button. Source Select Menu will
	appear.
3	Move a pointer to source that you want to select and then press
	SELECT button.
		When video input signal is connected to VIDEO jack,
	Video
		select Video.
		When video input signal is connected to S-VIDEO jack,
S-Video
		select S-Video.
		When video input signal is connected to VIDEO/Y, C
	Y, C
		jacks, select Y, C.

INPUT MENU

INPUT Menu icon

Move a pointer (red arrow) to Input 3 and press SELECT button.

Input 3

Source Select Menu (VIDEO)

Move a pointer to source and press SELECT button.

35