SETTING
USB
This Projector is equipped with USB port for interactive operation
between a projector and computer. Set mode following steps below.
Wireless Mouse mode
USB
Press SELECT button at this icon to display previous items.
Select " " when controlling a computer with Remote Control of this projector.
Projector mode
Select " " when controlling a projector with computer.
NOTE: Before you control a projector by computer, install USB driver (optionally sold parts) and set up computer following instruc- tion in USB driver package. Contact your authorized dealer.
Move a pointer to item and then press POINT LEFT/RIGHT button(s).
Lamp counter reset
Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE indicator stops lighting.
1 | Turn projector on, press MENU button and |
| MENU will appear. Press POINT LEFT/RIGHT button(s) to |
| move a red frame pointer to SETTING Menu icon. |
2 | Press POINT DOWN button to move a red frame pointer to |
| “Lamp counter reset” and then press SELECT button. |
3 | Move arrow to replaced lamp number (Lamp 1, Lamp 2, Lamp 3 |
| or Lamp 4) and then press SELECT button. Message "Lamp |
| replace counter Reset?" is displayed. Move pointer to [Yes] and |
| then press SELECT button. |
| NOTE: Be sure to reset correct lamp number otherwise LAMP |
| REPLACE indicator continues lighting. |
4 | Another confirmation dialog box appears and select [Yes] to |
reset Lamp Replace Counter. |
Do not reset Lamp Replace Counter except after Projection lamp is replaced.
Quit
Closes SETTING MENU.
13
24
Move pointer to Lamp counter reset and then
press SELECT button. Move arrow to replaced lamp number (Lamp 1, Lamp 2, Lamp 3 or Lamp 4) and then press SELECT button.
Message "Lamp replace counter Reset?" is displayed. Move pointer to [Yes] and then press SELECT button.
42
